55-65℃恒溫除油！全自動超聲波清洗機，頑固油污一鍵剝落

　　55-65 ℃ constant temperature oil removal! Fully automatic ultrasonic cleaning machine, one click peeling off of stubborn oil stains

　　工業生產及設備維保中，金屬工件、機械零部件表面的頑固油污、水垢、切削殘留，一直是清洗環節的核心難題。傳統人工擦洗、溶劑浸泡、高壓沖洗等方式，不僅效率低下、去污不徹底，還存在溶劑污染、損傷工件、人工成本高的弊端，尤其針對精密工件、異型構件、微孔縫隙處的油污，更是難以清理到位。而全自動超聲波清洗機搭配專用超聲波除油劑的組合，憑借恒溫高效、無死角去污的優勢，徹底破解工業除油除垢痛點，成為各類工業場景清洗的標配方案。

　　In industrial production and equipment maintenance, stubborn oil stains, scale, and cutting residues on the surface of metal workpieces and mechanical components have always been the core challenges in the cleaning process. Traditional methods such as manual scrubbing, solvent soaking, and high-pressure rinsing not only have low efficiency and incomplete cleaning, but also suffer from solvent contamination, damage to workpieces, and high labor costs. Especially for precision workpieces, irregular components, and oil stains in micro porous gaps, it is difficult to clean them properly. The combination of fully automatic ultrasonic cleaning machine and specialized ultrasonic oil remover, with the advantages of constant temperature, high efficiency, and no dead corners for cleaning, completely solves the pain points of industrial oil and scale removal, and has become a standard solution for cleaning in various industrial scenarios.

　　傳統工業除油痛點多，低效高耗難達標

　　Traditional industrial oil removal has many pain points, low efficiency, high consumption, and difficulty in meeting standards

　　五金加工、機械制造、汽車維保、模具生產等行業，工件加工后會附著切削油、潤滑油、防銹脂、氧化皮及水垢等雜質，傳統清洗模式弊端凸顯：人工擦洗耗時費力，無法觸及微孔、夾縫、盲孔等隱蔽位置，油污殘留嚴重；溶劑浸泡成本高、環保性差，易腐蝕工件基材，且揮發氣體危害操作人員健康；高壓噴淋僅能清洗表面浮油，頑固油污依舊附著，清洗合格率低，無法滿足精密工件的潔凈要求，拖慢生產維保進度，增加隱性成本。

　　In industries such as hardware processing, mechanical manufacturing, automotive maintenance, and mold production, impurities such as cutting oil, lubricating oil, rust proof grease, oxide skin, and scale may adhere to the workpiece after processing. The drawbacks of traditional cleaning methods are prominent: manual scrubbing is time-consuming and labor-intensive, and hidden positions such as micropores, crevices, and blind holes cannot be reached, resulting in severe oil residue; Solvent immersion has high costs, poor environmental friendliness, easy corrosion of workpiece substrates, and volatile gases pose a health hazard to operators; High pressure spraying can only clean surface floating oil, stubborn oil stains still adhere, and the cleaning pass rate is low, which cannot meet the cleanliness requirements of precision workpieces, slow down production maintenance progress, and increase hidden costs.

　　全自動超聲波清洗機+除油劑，科學配比高效去污

　　Fully automatic ultrasonic cleaning machine+degreaser, scientifically proportioned for efficient cleaning

　　全自動超聲波清洗機依托核心空化效應，通過高頻振動在清洗液中產生無數微小氣泡，氣泡瞬間爆破產生強勁沖擊力，配合專用除油劑，實現油污快速剝離，全程自動化運行，無需人工值守，真正做到省心高效。這套組合有明確的標準化操作流程，去污效果有保障：將超聲波除油劑按1:20比例兌水稀釋，注入清洗機后加熱至55-65℃恒溫，這個溫度區間能最大化激活除油劑活性，加速油污乳化分解，同時避免高溫損傷工件。

　　The fully automatic ultrasonic cleaning machine relies on the core cavitation effect to generate countless tiny bubbles in the cleaning solution through high-frequency vibration. The bubbles burst instantly, producing strong impact force. Combined with a dedicated degreaser, it achieves rapid oil removal and fully automated operation, without the need for manual supervision, truly achieving worry free and efficient operation. This combination has a clear standardized operating procedure and guaranteed cleaning effect: the ultrasonic degreaser is diluted with water at a ratio of 1:20, injected into the cleaning machine, and heated to a constant temperature of 55-65 ℃. This temperature range can maximize the activity of the degreaser, accelerate the emulsification and decomposition of oil stains, and avoid high-temperature damage to the workpiece.

　　將待清洗工件放入清洗機內，無需額外擦拭，啟動設備后，超聲波空化作用配合加熱稀釋液，頑固油污、水垢、金屬碎屑會快速從工件表面自動剝落，無論是平面工件還是異型精密件，都能實現360°無死角清洗，縫隙、微孔內的隱藏油污也能徹底清除，清洗效果遠超傳統方式，且全程溫和無損傷，不腐蝕金屬、不破壞工件精度，適配各類碳鋼、不銹鋼、鋁合金、銅質工件清洗。

　　Place the workpiece to be cleaned into the cleaning machine without the need for additional wiping. After starting the equipment, ultrasonic cavitation combined with heated diluent will quickly and automatically peel off stubborn oil stains, scale, and metal debris from the surface of the workpiece. Whether it is a flat workpiece or a precision shaped workpiece, it can achieve 360 ° no dead angle cleaning, and hidden oil stains in gaps and micropores can be completely removed. The cleaning effect far exceeds traditional methods, and the entire process is gentle and non-destructive, without corroding metals or damaging workpiece accuracy. It is suitable for cleaning various types of carbon steel, stainless steel, aluminum alloy, and copper workpieces.

　　設備核心優勢與工業場景適配性

　　Core advantages of equipment and adaptability to industrial scenarios

　　全自動款區別于普通清洗機，自帶恒溫加熱、定時清洗、自動排水功能，溫度、時間可精準調控，適配不同油污程度的工件，批量清洗效率極高，單批次可同時處理多個工件，較人工清洗效率提升4倍以上，大幅降低人工與時間成本。設備操作簡單，一鍵啟動即可完成清洗流程，工人無需專業技能，上手即可操作，且除油劑環保無磷、無刺鼻異味，廢液易處理，符合工業環保要求，杜絕污染隱患。

　　The fully automatic model is different from ordinary cleaning machines in that it comes with constant temperature heating, timed cleaning, and automatic drainage functions. The temperature and time can be precisely controlled to adapt to workpieces with different degrees of oil pollution. The batch cleaning efficiency is extremely high, and multiple workpieces can be processed simultaneously in a single batch, which is more than four times more efficient than manual cleaning and significantly reduces labor and time costs. The equipment is easy to operate and can be started with just one click to complete the cleaning process. Workers do not need professional skills and can operate it by hand. The degreaser is environmentally friendly, phosphorus free, and odorless, and the waste liquid is easy to handle, meeting industrial environmental protection requirements and eliminating pollution hazards.

　　該清洗組合廣泛適用于五金零件、汽車零部件、模具、機械軸承、精密構件等各類工業工件，除油除垢一步到位，清洗后的工件潔凈如新，無油污殘留、無劃痕損傷，既能滿足普通工件的基礎清洗需求，也能適配精密工件的高標準潔凈要求，徹底解決工業除油除垢難題，助力企業降本增效、提升生產維保質量。

　　This cleaning combination is widely applicable to various industrial workpieces such as hardware parts, automotive parts, molds, mechanical bearings, precision components, etc. It can remove oil and scale in one step, and the cleaned workpieces are as clean as new, without oil residue or scratch damage. It can meet the basic cleaning needs of ordinary workpieces and also adapt to the high standard cleanliness requirements of precision workpieces, completely solving the problem of industrial oil and scale removal, helping enterprises reduce costs, increase efficiency, and improve production maintenance quality.

　　本文由 全自動超聲波清洗機 友情奉獻.更多有關的知識請點擊 http://www.dijiushangdian.cn  真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the fully automatic ultrasonic cleaning machine For more related knowledge, please click http://www.dijiushangdian.cn Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.