歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題

常見問題

通過式超聲波清洗機的工作與其他設備有哪些不一樣？

作者：admin來源：http://www.dijiushangdian.cn/時間：2021-07-26

隨著超聲波清洗機的應用越來越廣泛，各種清洗設備都在不斷改進和完善，正在取代市場上的舊設備。清洗機采用的清洗技術為超聲波清洗，頻率為28kHz，由噴淋系統，噴嘴旋轉裝置，磷化系統組成。該系統由自動溫控加熱系統，風刀，吹水系統組成。對于一些特定的清洗對象，也有熱風干燥，專用清洗架和清洗液過濾系統。

With the more and more extensive application of ultrasonic cleaning machine, all kinds of cleaning equipment are constantly improving and perfecting, and are replacing the old equipment in the market. The cleaning technology adopted by the cleaning machine is ultrasonic cleaning with a frequency of 28kHz, which is composed of spray system, nozzle rotating device and phosphating system. The system consists of automatic temperature control heating system, air knife and water blowing system. For some specific cleaning objects, there are also hot air drying, special cleaning rack and cleaning fluid filtration system.

清洗機工作時，將物料架放置在輸送帶上，工件安裝在相應的物料架上。各部分不重疊，節奏為2-3分鐘/籃子，籃子依次經過潔凈室、沖洗室、干燥室和干燥室，完成潔凈后的全過程，潔凈備件，如需手工灌裝水滴，干燥部放置。防塵翻轉箱。

When the cleaning machine works, place the material rack on the conveyor belt and install the workpiece on the corresponding material rack. Each part does not overlap, and the rhythm is 2-3 minutes / basket. The basket passes through the clean room, flushing room, drying room and drying room in turn to complete the whole process after cleaning. Clean spare parts. If it is necessary to fill water droplets manually, place them in the drying department. Dustproof turnover box.

與傳統的清洗設備相比，該洗衣機的主要特點不能有效地防止對高光澤表面的損傷，而且也除去亞微米粒度附著在表面，甚至液體時，傳感器的側表面可以浸漬是C.傾斜，這樣雙方都可以進行清洗。

Compared with the traditional cleaning equipment, the main characteristics of the washing machine can not effectively prevent the damage to the high gloss surface, but also remove the submicron particle size attached to the surface, and even when the liquid is immersed, the side surface of the sensor can be c. inclined, so that both sides can be cleaned.

在通過清洗機進行操作時，要注意學生保持一個清潔工作部件在輸送帶上的定期，不要壓在輥子上；在輸送帶上，清洗過的部件之間不能因為過度堆積，以防止清洗效果，并確保我們每個功能部件都能被清洗。

Do not press the parts on the conveyor belt during regular cleaning; On the conveyor belt, there shall be no excessive accumulation between the cleaned parts to prevent the cleaning effect and ensure that each of our functional parts can be cleaned.

洗衣機運行后，清洗后的部件不能被放置在傳送帶上，停止按鈕停止機器，清洗液定期加入水和金屬清洗劑的量，以補償消耗。電平被保持在一定的高度。如果清潔效果通過常規技術要求實現，該洗滌液應更換。

After the washing machine runs, the cleaned parts cannot be placed on the conveyor belt, the stop button stops the machine, and the amount of water and metal cleaning agent are regularly added to the cleaning fluid to compensate for consumption. The level is maintained at a certain height. If the cleaning effect is achieved by conventional technical requirements, the washing solution shall be replaced.

以上就是今天小編帶給大家的精彩內容，超聲波清洗設備將不斷深化自身的實力，不斷的提高質量，做好價格公正，歡迎大家在網站上點擊購買：http://www.dijiushangdian.cn

The above is the wonderful content brought to you by Xiaobian today. The ultrasonic cleaning equipment will continue to deepen its strength, continuously improve its quality and do a good job in price justice. Welcome to click to buy on the website: http://www.dijiushangdian.cn

上一篇：超聲波清洗機的清洗效果與什么因素有關？
下一篇：真空碳氫清洗機的優勢有哪些？